In this page we’ll be guiding you through how to set up Dubler with Cubase
First of all make sure that the Dubler application is open at the the mic is connected, as shown by the green logo at the top of the app
Once this is done you can now open Cubase and enter one of your projects. On the instrument you want to control make sure the record button is armed.
You can then select the MIDI input channel on the left hand side in the Inspector tab. Simply click on the input tab and then select Dubler from the drop down menu
Dubler will now be able to play the channel, however it will be receiving MIDI information from both the pitch and triggers side. In order to select which MIDI channel the track receives information from select the Input Transformer button in the Inspector tab and select ‘Local’ from the drop down menu
You’ll now see the input transformer box. Click the box in the top left of the window and select Channel Filtering from the drop down menu. Here you can then select which MIDI channel you want the track to receive info from.
Note: By default the Triggers works on MIDI channel 10. The Pitch works on MIDI channel 1. You can change both of these in Dubler should you wish.
Once this is done make sure to select the power button next to ‘Module 1.’ You can now exit the window.
You can now repeat the above steps for which ever channel you like. In order to play multiple channels at the same time, make sure that the above steps are done for each track and then you can arm multiple tracks by alt clicking the record button
Note: On Windows make sure “Constrain Delay Compensation” is on in order to reduce latency.